You need to take proper measurement before you place an online order for window blinds.
Measurements are important since it in turn decides whether your purchase would
fit rightly on the windows or doors; moreover over sized purchase not only adds
extra costs but also adds work of resizing it- which means obvious wastes. So
you can’t skip spending time for measurements. No blind is that flexible that
you buy and fit it to any window. This article would brief you on some useful tips to measure window blinds.
Do you wish an inside mount or do you prefer an outside mount?
That needs to be decided first. For inside mounts to fix requires a curtains
depth in the window. Inside mounts are often preferred to achieve a neater
look. You go for an outside mount when the window is somewhat a non-square
shape. It even suits for shallow openings.
Collect all measuring tools in one place before you actually
start doing it, because that would make it go faster. Some obvious stationery is
pen, notepad, a measuring tape. Create columns with headings: Net Height | Top
Width | Center Width | base Width. To get a neat layout you may do it in your
computer.
French doors:
To get a better insulation, illumination control and of course
privacy- it is good if you mention your order taller and wider. You would
require an estimated 100x500mm extra per Roller Window blinds for the mounting
brackets on top. A buffered measurement ensures that the roller blind is raised
to block less of sight.
Sliding doors:
The window/door blinds can be decided to mount either to fit
into the recess or on the face of wall. Your handle should not be an
obstruction to your design.
While drilling into wall tile, it is advisable to paste the
drilling area with a masking tape. This will only ensure no-slipping of the
drill from that points.
When you get the material in hand- get together the tools and
unpack the roller blind. Take out the blind from the parcel and place the
installation
brackets
which are provided as a match up. Figure out from your blind which side you prepared
the control to be on. One bracket is supposed to be used with the control
side of blind with aid of a chain and the next bracket is with the rotators end.
The installation
brackets are usually mounted to make the inner surfaces face each
other. It is significant that the brackets are mounted so that the blind is in
a level when finally installed.
Continue post for Useful tips you need to know when measuring for blinds
Continue post for Useful tips you need to know when measuring for blinds
